protecfire GmbH - logo - Fire Suppression

Special liquid extinguishing agent

TiboRex® Absolute
Special Liquid Extinguish Agent
TiboRex Absolute is a ready-to-use liquid special extinguishing agent without the addition of fluorochemicals for the highly effective extinguishing of solid fires (fire class A), liquids, non-polar hydrocarbons (fire class B) and edible fats and oils. The special formulation, whose main components are also used as food additives, guarantees exceptional extinguishing performance with unprecedented environmental protection.

Only small amounts of extinguishing agent required
The object to be protected remains almost undamaged

Quenching effect
Extinguishing through oxygen reduction
Also hidden fires are extinguished
Extinguishing of fires in cavities

Residue monitoring and guaranteed quality
Residues of the extinguishing agent on the object can be identified with the help of ultraviolet light. A chemical analysis (DNA) can verify and confirm that the original TiboRex Absolute was used.

Ultrafast cooling
Enormous reduction of surface temperature
Avoidance of re-ignition
Reduced effect of fire
Quick interruption of combustion process

Blanketing fat and oil fires
When cooking fats and oils burn, TiboRex Absolute uses chemical reactions to form a closed, gas-proof protective layer quenching the fire and protecting the hot fat or oil from re-ignition by cooling them down very quickly.

Environmental friendliness
Ecological and 100% fluorine-free extinguishing agent
Biodegradable
Nontoxic to humans and animals

TiboRex® Absolute Specifications


TiboRex Absolute is used undiluted and has been specially formulated for use in extinguishing systems and components developed by protecfire GmbH, which have been developed, tested and approved for specific purposes.

Data Sheet

Appearence: yellow-green transparent liquid
Density a 20ºC: 1.275 ± 0.015 g / mL
pH Value: 8.5 ± 0.5
Recommended Temperature Range: -30ºC a +65ºC
Maximum operating temperature range: -45ºC a +80ºC
Certifications

TiboRex Absolute is tested and approved by MPA Dresden GmbH according to the requirements of DIN EN 1568 and DIN EN 3.

It is supplied in 20 or 25 L canisters or in 200 or 1000 L drums.

3 stages fire suppression

Cooling Effect Fine Spray Droplets that penetrate fire
TiboRex Absolute produce very fine droplets, smaller than100μm.

Oxygen Suffocation by evaporation
Due to the required enthalpy of evaporation of 2.26 MJ/kg (equivalent to 1 litre of water) energy is extracted from the burning object in a minimum of time and it cools down substantially.

Ultra Cooling through Sublimation
Layering with solid crystals that convert to gas TiboRex Absolute’s main components form crystalline structures. With the still existing combustion temperature, these solid structures change from the crystalline phase to a gaseous phase. The enormous enthalpy of evaporation (heat) required for this amounts to 7.23 MJ/kg.